The Extra High Level Peroxide test strip is calibrated at 0, 500, 1000, 2500, 5000, and 10000ppm, and gives results in 90 seconds. These strips are used to test concentration levels of Peroxide solutions used in cases where strong disinfection is needed. This test strip is designed to work with solutions prepared from concentrated hydrogen peroxide only. It should not be used to test solutions made using “accelerated” hydrogen peroxide products. These type of solutions require specially formulated test strips.
Extra High Level Peroxide, 10000ppm
Extra High Level Peroxide, 10000ppm
- Remove one test strip from the vial. Do not touch the test pad with your fingers.
- Dip the test strip into the solution being tested for 1 second.
- Remove and do not shake the strip.
- Compare the test pad to the color chart after 90 seconds.
PER5000; PER-5000; PER-5000-1V-50
Product Specs
SKU: | PER-10000-1V-50 |
---|---|
Strip Quantity: | 50 strips |
Vial Dimensions: | 1.125″ (D) x 3.375″ (H) [29mm (D) x 86mm (H)] |
Strip Dimensions: | 2.5" (L) x .1875" (W) [64mm (L) x 5mm (W)] |
Weight: | 0.07 lbs [33.4 g] (50-strip vial) |
Other: | Stored in a flip-top vial with built-in desiccant liner. |
Shelf-Life: | 2 Years |
Label: | Customizable water-resistant label |
Product Documentation
What types of peroxides can I test with your Peroxide test strips?
All of our Peroxide test strips are suitable for detection of hydroperoxides and ether peroxides. Polymeric peroxides, which can form in diethylether, are not detected. Organic peroxides, such as di-terc-butyl peroxide, di-cumyl peroxide or terc-butyl perbenzoate, either do not react or react with significantly reduced sensitivity.